Malfunction Diagnosis-Zumsun | Funiculars

scroll down

Business areas

Perfect leisure vacation starts from the ropeway

The Perfect Leisure vacation starts with the cableway !

Home

Malfunction Diagnosis

< Statement 1 > Specific content of cableway troubleshooting:

1. Preliminary inspection and evaluation

Check the running condition of the cableway: Observe whether there is abnormal sound, vibration or pause during the operation of the cableway.
Assess the operating environment: Check the surrounding environment for factors that may affect the operation of the ropeway, such as bad weather, geological changes, etc.

2. power system inspection

Check the power supply: Ensure that the power supply of the cableway power system is stable, and there is no power failure or voltage instability.
Check the wires and cables: check whether there is a short circuit, open circuit or aging of the wires, and replace the damaged wires and cables in time.

3. electronic control system inspection

Check the control system: evaluate the operating status of the control system to find if there is a fault or abnormal situation.
Check the sensor: ensure that the sensor is working properly, can accurately sense the running status of the cable and transmit signals.

4. mechanical system inspection

Check the driving mechanical parts: check whether the driving mechanical parts are damaged or worn, and repair or replace them in time.
Check the cable car crane: confirm that the cable car crane is structurally and functionally sound, and rule out potential mechanical failures.

5. Climate considerations

Climate monitoring: Set up a climate monitoring system to monitor wind speed, temperature, humidity and other climate factors in real time to prevent the impact of bad weather on the ropeway operation.
Response measures: In bad weather conditions, timely safety measures, such as suspension of ropeway operation, to ensure the safety of passengers and employees.

Human factors and emergency rescue preparedness

Training and education: Conduct regular training on ropeway operation and maintenance for employees to improve their operation skills and safety awareness.
Emergency rescue plan: Formulate emergency rescue plan to ensure that passengers can respond quickly and carry out effective rescue in the event of physical discomfort, panic and other emergencies.

Through the above, you can systematically troubleshoot the cableway faults, discover and solve the problems in time, and ensure the safe and smooth operation of the cableway. At the same time, regular maintenance and maintenance of ropeway equipment is also an important measure to prevent failure.

< Statement 2 > Specific content of cableway troubleshooting:

1. cable inspection

Main cable and auxiliary cable inspection:
● Check whether the main cable and auxiliary cable of the ropeway have obvious fracture, wear or deformation.
● Use professional tools to measure the diameter and tension of the cable to ensure that it is within the specified range.
Fixture inspection:
● Check whether the support, lifting point and fixed wire rope of the cable are firm and reliable, without loosening or corrosion.
● Pay special attention to whether the fasteners at the connection point are complete and intact.
● Ropeway wheel, pulley and wire rope inspection:
● Check whether the ropeway wheel and pulley are flexible and have no blocking phenomenon.
● Check the wear of the wire rope, especially the part in contact with the cable wheel and pulley, and replace it if necessary.

2. ropeway vehicle inspection

Appearance inspection:
● Check whether the appearance of the ropeway vehicle is intact and whether there is obvious damage or corrosion.
● Pay special attention to check the wear of the vehicle and the contact part of the ropeway.
Suspension inspection:
● Check whether the suspension device of the ropeway vehicle, such as pulley, pulley frame, etc., is in normal operation, without abnormal sound or vibration.
● Check whether the fasteners of the suspension device are complete and intact.
Brake and safety inspection:
● Check whether the brake device of the ropeway vehicle is reliable and whether the braking distance meets the requirements.
● Check whether the safety facilities of the vehicle, such as safety doors, seat belts, etc. are in good condition and function normally.

3. ropeway station room inspection

Building structure inspection:
● Check whether the building structure of the ropeway station room is stable, without cracks, tilts and other conditions.
● Check whether the foundation is firm and there is no settlement.
Electrical equipment inspection:
● Check whether the electrical equipment of the ropeway station room, such as lighting, ventilation, power supply, etc., is in normal operation.
● Pay special attention to check the electrical components and wiring of the control system to ensure that there is no short circuit and open circuit phenomenon.
Safety facility inspection:
● Check the safety facilities of the ropeway station room, such as fire extinguishers, emergency stop buttons, etc., are complete and effective.
● Check whether the alarm device is working properly, and can find and alarm abnormal situations in time.

4. Check the hydraulic system (if the cableway includes the hydraulic system)

Oil inspection:
● Check whether the oil of the hydraulic system is clean and free of impurities and sediments.
● Check the viscosity, color and smell of the oil to determine whether it is deteriorated.
Pipe and joint inspection:
● Check whether the pipelines and joints of the hydraulic system are leaking oil or leaking oil.
● Check pipes and joints for damage or aging.
Hydraulic pump and motor inspection:
● Check the operating sound and vibration of the hydraulic pump and motor to determine whether it is running normally.
● Check the temperature of the hydraulic pump and motor to ensure that it does not overheat.

5. Safe operation and emergency treatment

Operator inspection:
● Check whether the ropeway operator holds the corresponding operation certificate and has been professionally trained.
● Check whether the operator strictly abides by the operating procedures to ensure the safe operation of the ropeway.
Emergency preparedness:
● Check whether the ropeway has an emergency stopping device, and ensure that the operator is familiar with the emergency stopping procedure.
● Check whether the cableway is equipped with an alarm device, and ensure that it can detect and alarm abnormal situations in time.
● Regular emergency drills to improve the response speed and processing capacity of emergency personnel.

Through the above detailed cableway troubleshooting content, you can check all parts of the cableway in detail and systematically, discover and solve problems in time, and ensure the safe and smooth operation of the cableway.

The specific process of cableway troubleshooting:

1. Initial reception and response

Receive fault reports: Once a report of a cableway fault is received, the troubleshooting process is initiated immediately.
Preliminary judgment: Based on the report, make preliminary judgment on the fault and determine the possible fault type and cause.

2. professional team dispatch

Team building: According to preliminary judgment, set up a troubleshooting team with relevant professional knowledge and experience.
On-site dispatch: Quickly dispatch a professional team to the scene of the cableway failure.

3. On-site investigation and testing

Site safety confirmation: After arriving at the site, first confirm the safety to ensure that the investigation process does not cause secondary damage to personnel or equipment.
Detailed survey: Detailed and detailed survey of the ropeway, including electrical system, mechanical system, control system and other aspects.
Professional testing: The use of professional tools and equipment, detailed testing of the ropeway, such as the use of thermometers, multimeters and other tools to detect the electrical system, the use of professional instruments to detect cable wear.

4. Fault location and diagnosis

Data analysis: Based on the test results, combined with professional knowledge and experience, fault location and diagnosis.
Determine the cause of the failure: Accurately determine the cause of the failure, such as electrical failure, mechanical failure, control system failure, etc.

5. Fault repair and verification

Repair plan development: According to the cause of the failure, develop a detailed repair plan, including the required materials, tools, manpower and time.
Troubleshooting: Rectify the fault according to the troubleshooting plan. Such as replacing damaged parts, repairing broken cables, etc.
Repair verification: After the repair is completed, the cable way is tested and verified in detail to ensure that the fault has been completely repaired and the cable way can operate normally.

6. Follow-up support and summary

Provide follow-up support: After the fault is repaired, provide follow-up technical support and consultation to ensure long-term stable operation of the ropeway.
Summary and feedback: Summarize and feedback the troubleshooting and repair process, analyze the fault causes and deficiencies in the troubleshooting process, and propose improvement measures to improve the efficiency and quality of troubleshooting and repair.

The above is the specific process of ropeway troubleshooting, through the rapid response and scene investigation of the professional team, combined with professional knowledge and experience, you can ensure that the fault is timely and accurate troubleshooting and repair, to ensure the normal operation of the ropeway and the safety of tourists.

Business areas

Design & Construction

Ropeway Upgrading

Overhaul Services

Malfunction Diagnosis